Fork Rechrome Service

Services

Motorcycle Fork Rechroming Service

SSR Suspension collaborate with an Industry Leading Firm to provide you with the highest quality Motorcycle Fork Rechroming Service


***CURRENT LEADTIME IS MINIMUM 4 WORKING WEEKS FOR ALL RECHROME WORK***

WE DO NOT DEAL WITH LOOSE FORK STANCHIONS, ONLY FULL FORK REBUILDS. CONTACT US IF YOU HAVE LOOSE STANCHIONS & DON'T GET RIPPED OFF BY ANOTHER SUSPENSION COMPANY!


Motorcycle Fork Rechroming Service Do you have pitted forks, or is the chrome plating wearing on your stanchion or on your shocks shaft?


We work with leading industry platers to provide the highest quality re-chroming to ISO 9001/ISO 14001 standards.  Our service will see us strip your forks completely and send the stanchions to our partners.  Upon their return to us we will rebuild your forks so they are freshly serviced,  our nominal service cost will apply in addition to the re-chroming cost.  Click the link for full Fork Service Details & cost.


Regrinding and Rechroming costs:

 

  • Single Stanchion (Conventional) Re-chrome £102.00
  • Pair of Stanchions (Conventional) Re-chrome £186.00
  • Single Stanchion (USD) Re-chrome £108.00
  • Pair of Stanchions (USD) Re-chrome £198.00

 


Can the stanchion be saved?  The chrome plating in certain circumstances on Motorcycle forks over time can wear.  You may also get pitting on the chrome stanchion which when left unattended can cause severe corrosion and breakdown of the surface treatment.  Depending upon the penetration and depth of pitting, it may be possible for us to polish out the surface contaminant, but in other circumstances this will not be possible and there will be no option other than having the stanchion ground and re-chromed or replacing the stanchion with new.


It may not be well known, but motorcycle suspension companies do not conduct their own motorcycle fork re-chroming.  It is sent out to specialist engineering companies with the tools and processes to carry out this service.  The process of a regrind/re-chrome involves grinding old chrome plating using a centreless grinder to remove all surface damage.  Stanchions are then hard chrome electroplated so that they are slightly oversized.  Once the plating process is completed they are finish ground, with an accuracy of 0.125mm.  Finally the stanchions are linished and polished to give a perfect finish, which aids the 'bedding in' process and extends seal life. 


Share by: