Shock Servicing

Motorcycle Shocks

Shock Absorber Refurbishment, Motorcycle Shock Repairs, Motorcycle Shock Tuning

SSR Suspension are Authorised Service Centres for Andreani, K-Tech Suspension, KYB Off Road Suspension & Nitron Suspension

Shock Servicing for Road/Track/Race bikes, MX/Enduro bikes & Sidecars from £140.00 (Single Shock supplied loose).


Shock Servicing @ £140.00 includes -

  • Oil & Scraper seals
  • O-Rings
  • Nitrogen fill
  • Shock Fluid
  • inspect DU bush/Piston Band
  • Shock shaft checked for straightness
  • Shock shaft polished
  • Piston cleaned & faced
  • Shims cleaned
  • Rebound needle & rod inspected,
  • O-rings greased
  • Base setting


***IF YOU NEGLECT TO CLEAN YOUR SHOCK BEFORE SENDING IT TO US, WE WILL CHARGE YOU A CLEANING FEE, TO SEND YOUR SHOCK COVERED IN MUD IS NOT ACCEPTABLE***

With the motorcycle shock absorber rebuild service, the shock is initially fully stripped to its bare componentry.  All parts are cleaned and degreased prior to the componentry being inspected for any undue wear and tear.  The piston/valve assemblies are disassembled from the shock shaft, the pistons are faced to ensure optimum sealing of the face shims and all shims are checked to ensure their integrity (if required shims will be replaced*).   The shock shaft is polished to aid in the reduction of stiction and to improve sealing sealing, the shafts bleed jet where fitted is removed and the rebound bleed components are removed/inspected from inside the shaft and cleaned.  Finally the piston band is replaced with a PTFE low friction band where applicable and the bump rubber is replaced if required*.


If the shock is fitted with a bladder this will be removed and checked for integrity, if required it will be replaced*.  If the shock is a dividing piston design the piston assy will be removed along with its piston band and/or O-Ring for inspection and replacement.  When the shock is rebuilt we replace the Seal Heads O-Ring, the scraper seal, the shaft seal and inspect the DU bush for any undue wear.  If the DU Bush is worn we will replace it. 


Once the whole shock has been stripped, cleaned and inspected it will be rebuilt in dry form before it is filled using the latest Andreani Vacuum Bleed Pump and filled with K-Tech KTSF-012 shock absorber Fluid.  Once bled the shock is manually checked and for any air that may be left in the system from the process and removed with a final bleed, before finally charging the shock with the required volume of Nitrogen. 


**Please note We do not re-gas shocks without a service, if the gas pressure is low or non-existent the shock must be fully serviced and this is often an issue we see with bladder shocks mainly due to the neglect of servicing.  A lack of gas pressure can cause internal issues due to possible cavitation that may have taken place.**


As a Nitron Authorised Service Centre we are able to service Nitron Sidecar Shocks in line with Nitron Service Specs.

***The high majority of shocks can be serviced, even if you have been led to believe they can not, check with us first if in doubt***

Share by: